Get a line output converter and do it the right way. There’s just too much potential for trouble like this when doing it the “easy” way, especially with VW’s history of electrical engineering. My gut says this is more a problem with audio sensing, and not with using the speaker level versus line level. If the speakers are picking up sound, and they create a signal, that would just be converted to a line level signal. Line level converters are passive elements and don’t rely on a switched source for power, nor do they filter input. I tested this the other day by speaking into one of the rear speakers as the sub is currently hooked up. The sub turned on with the head unit off. I hooked it up to a speaker put the speaker inputs on the sub input and tapping the speaker will turn the sub on.
I don’t understand the logic that it is easier to blow a watt speaker with a 10 watt amp over a watt amp. Can you please explain? I don’t think a quality 10 watt amplifier will do much damage to a watt speaker. My point is, overpowering is better than underpowering the speaker.
FOR SALE – Anchorage, AK – A used but perfectly working Infinity Basslink Subwoofer. It is a 10″ sub with a passive radiator which doubles as a second sub for.
Plan A got trashed when the Soundgate adapter didn’t work. Never did figure out exactly why, but the company’s tech support guessed that since my vehicle didn’t come with any external audio devices, the auxiliary input might not have been set up to work at all the head unit wouldn’t detect the auxiliary input. So I moved on to Plan B, which was this: I installed it with the Infinity subwoofer and the three pairs of aftermarket speakers the Kenwood amp was to be eBay’ed, thanks to ridiculous mail-order restocking charges.
Worked fine and sounded pretty good until I realized that when the door and dash speakers are wired together in parallel, the ohms went from 4 to 2. Not good for the head unit I tried running the dash speakers separately, then the door speakers, but it didn’t sound as good as when all 6 speakers were going at once. So I moved on to Plan C. Plan C was to use the Kenwood amp to power all 3 pairs of speakers.
But where to mount the amp? It was too big to fit under any of the seats, and I didn’t want it lying in plain view of would-be thieves although the Sony head unit and Infinity sub kinda make that a moot point. Also, I didn’t want to use up any more cargo space in the back of the Blazer. I’d heard of guys putting amps in the small storage areas behind the front seats, so that’s what I did.
It wasn’t easy and it took a long friggin’ time, but here’s how it went.
Amp is on but subwoofer wont play?
High Technology Glass-Reinforced ABS Enclosure ABS enclosure is water-resistant and suitable for marine and off-road applications without the buzz and resonance problems generally associated with traditional wood boxes. Easy Hook-up and Placement Quick disconnects and quick-release connections are provided for easy hook-up and system placement options—including complete removal when extra cargo space is needed. BassLink DC also has four channel high level inputs to ensure non-fading bass.
Sep 16, · What do s the best way to hook up the Infinity servo subwoofer rs 10 to my surround sound receiver which is a Pioneer VSX-DS? MaryLouMaloney, Sep 15, Sep 15, at PM Infinity Basslink Subwoofer £ Posted By ant_j In .
At each stage test This is the order I’d recommend. That’ll bring the music to ear-level. Simple, 5 minute install Its all plug and play Made my music much more enjoyable.. But I still wanted more from my system. If you like the way the system sounds, but you feel it lacks bass
Upgraded speakers Wyliec November 27th, , It could be very helpful to anyone looking to upgrade. I’ll start with what I have, and can add on to the list as you throw it at me. Power handling and sensitivity would be good info as well! I hope the mods delete mine.
It will hook up with RCA conncetors or to the factory system via speaker wires. You can mount it horizontal or vertical. Crutchfield and Car Toys have this for $ but I bought mine off of ebay, brand new with the “buy it now” option for $
Auto Hey guys, I’m almost done with replacing all the speakers in my car. I have the BA 7 speakers setup HU and have replaced everything with Infinity reference except doors which are fosgate punch. I want to move to the sub and want to keep it simple with an integrated system. I listen to rick music and I’m looking for something to annoy my neighbors, just something to bring more life to my system.
Based on my research, I plan to tap on the rear speakers with an L2Ci line out converter more questions on this. I have 3 options order in current preference: I could get an extended warranty for piece of mind. I found a picture of a challenger that has it tucked to the side of the trunk and takes virtually no space 2- JBL GT BassPro 12 – I think this would be the best option sound wise, but the space in the trunk is a concern. If so, would it then go to the low input or still to the high?
Subwoofer AND factory rear speakers in a GTS?
Also my center dash speaker is blown I was wondering how I remove the dash to get to the speaker. I bought a nice Alpine mp3 player for my car, upgraded the Infinity speakers to the Kappas. Then put a Alpine amp and Infinity basslink in the trunk. You can find all the speaker upgrades on Ebay. They are half the price of what the store wants and they are brand new.
· I was wondering if is possible to hook subs up to my stock infinity antitheft stereo in my eclipse?Also my center dash speaker is blown I was wondering how I
BassLink has been designed to provide the kind of high-performance low-frequency reproduction that used to require big, clumsy enclosures, large amplifiers, and complex installation. To ensure maximum performance, we strongly recommend that installation be entrusted to a qualified professional. Although these instructions explain how to install the BassLink in a general sense, they do not show the specific installation methods for your particular vehicle.
If you feel you do not have the necessary tools or experience, do not attempt the installation yourself; rather, ask your authorized Infinity car-audio dealer about professional installation options. Remember to keep this manual and your sales receipt in a safe place for future reference. Playing loud music in an automobile can permanently damage your hearing as well as hinder your ability to hear traffic. We recommend using low volume levels while driving.
Infinity accepts no liability for hearing loss, bodily injury or property damage resulting from the use or misuse of this product. This effect, known as the vehicles transfer function or cabin gain, plays an important part in shaping the overall in-car response of the BassLink.
Next Looking for Powered Sub. Infinity basslink or power acoustik abw 10? Ok, so I don’t know a whole lot about car audio, but I’m looking for a good deal on a subwoofer.
Combined with the Infinity basslink it is deafening at high volume with no distortion.. The sound is just great! johnsnownw. January 1st, , PM. I also have an old Alpine 4ch amp that I may hook up at some point if the I don’t feel the HU is enough. I know the HU won’t put out 4x60w, but it should sound pretty good.
How to hook up a subwoofer to a stereo system Hint: You don’t necessarily need a receiver with subwoofer output jacks. Subs can provide a foundation to the sound that few speakers can muster on their own. So adding a sub is not just about adding more and deeper bass; rather, a properly integrated subwoofer can improve the overall sound of the system.
AV receivers feature bass management to direct the low bass frequencies to the sub and the midrange and treble frequencies to the speakers. The subwoofer is hooked up to the receiver with a single interconnect cable. Stereo receivers, pre-amps, and integrated amplifiers rarely have subwoofer output jacks or offer bass-management options. So instead of using those connections, we’ll use the subwoofer’s speaker-level, aka “high-level,” inputs.
Most, but not all, subwoofers have these inputs; they get connected using speaker cables to the same speaker output jacks on your receiver or amplifier that are also hooked up to your speakers. That means you have to double up the connections on the receiver or amplifier see photo below that illustrates that connection method. The top picture has just the speaker cables connected to the stereo amp; the bottom picture has the speaker and subwoofer cables connected.
Infinity servo subwoofer rs 10
I believe it should work for hatchbacks models. In no way can I be held liable for any damage you may cause to your car’s electronics by attempting the following procedure. Please try to figure out where you want to position your new reverse lights as the old ones will become blinkers. Before you start working on this project, obtain the following tools: The second picture depicts a V curcuit tester. The wire in the first picture should be about 16 GA.
· how do i hook up an infinity basslink in my s4 b5 that has the bose system? is there a diy out there? I have searched but really cant find anything definative- /how-do-i-hook-up-an-infinity-basslink.
I searched these forums, as well as every other possible place on the interwebs I could to look; all to no avail. Now, that’s not to say there isn’t another guide out there somewhere, but I sure as hell couldn’t find it. Long story short; I decided to tackle the custom audio setup myself. I didn’t really want to replace the existing system, but add onto it. Hopefully this guide will be helpful to you whichever you decide to do, but let me give you a small warning here: This means I probably bounced around this whole thing taking more time than was necessary and you may be able to do it better using a different order of steps.
I would suggest reading this DIY all the way through before doing any actual work. Tools to get started: Torx Bits – Mostly you’ll use a T20 you’ll need a driver for these unless you have a Lay the rear seats forward using the controls in the trunk. Remove the stock Fender Subwoofer Dash to give yourself some room.
How to Install an Infinity Speaker by Patrick Hutchison Infinity is an electronics manufacturer specializing in audio equipment. Use of Infinity speakers, subwoofers and receivers range from cars to home theaters. Infinity speakers are designed to offer the best sound possible. In order to maximize the technology and the design that Infinity offers, proper setup is critical.
Install your Infinity speaker correctly and begin enjoying crystal clear audio.
Best Buy carries a wide selection of car subwoofers, so no matter what kind of vehicle you drive, you’ll be able to find the right box from brands such as Kicker, Bassworx, JBL, Alpine, Kenwood, Bazooka, Pioneer, and ://
Thank you for choosing the Infinity BassLink. BassLink has been designed to provide the kind of high-performance low-frequency reproduction that used to require big, clumsy enclosures, large amplifiers, and complex installation. To ensure maximum performance, we strongly recommend that installation be entrusted to a qualified professional. Although these instructions explain how to install the BassLink in a general sense, they do not show the specific installation methods for your particular vehicle.
If you feel you do not have the necessary tools or experience, do not attempt the installation yourself; rather, ask your authorized Infinity car-audio dealer about professional installation options. Remember to keep this manual and your sales receipt in a safe place for future reference. Playing loud music in an automobile can permanently damage your hearing as well as hinder your ability to hear traffic.
We recommend using low volume levels while driving. Infinity accepts no liability for hearing loss, bodily injury or property damage resulting from the use or misuse of this product. BassLink is designed to reproduce frequencies below about Hz, but there may be other speakers in your vehicle that reproduce some of those same frequencies. It is important that all the speakers work together to reproduce frequencies they share.
The resulting conditions, known as constructive and destructive interference, also play a role in shaping the frequency response of your system. Fortunately, BassLink has controls that may be adjusted to optimize both of these conditions.